Stampede Blog

Some of our thoughts

How To Pick The Right Crane For Your Project

How to pick the right crane for your project

Here is how can you pick the right crane for your project

Pick the right crane: Cranes are efficient machines and are essential for different industries. Primarily, cranes are used in the manufacturing, construction, production, power and energy industry. If you have a requirement for the use of a crane for any project, there are certain things that you need to learn before arriving at the decision of picking a crane for it.

Choosing the proper and correct crane for your needs is very important for the project to be a success. In addition, the selection of the right crane will prevent any delays in the project and losses. Selecting an improper crane can be potentially risky and dangerous.

Stampede crane often provides valuable content to its readers in order to provide them good and reliable information. This article also provides some valuable information in the form of  some questions and answers.

Read the full article and learn more about selecting the right crane for your project!

The questions and answers are as follows:

How High is the Work to Be Done?

The height of the work is going to impact how the boom is set up, as well as what kind of boom will be necessary. Furthermore, the extension of the crane’s boom can be affected by the wind, which increases exponentially as the height increases. In addition, the amount of counterweight needed to heft loads to ever-increasing heights needs to be calculated differently versus if the height is lower. Tower cranes now have dramatically higher capacity than they once did, and they can often lift over 1,000 meters into the air.

How Far is the Load From the Crane?

The counterweight, the support structure and the stability of the boom are all affected by the distance from the load’s origin point to the base of the crane. As well, the rated load weight also varies based upon the distance from the crane’s base to the load at the end of the boom or jib. Every crane has a load chart that explains how much load can be hoisted at one given point, and exceeding this level of weight can cause problems with the operation. In some instances, such as in factory or other tightly confined spaces, overhead cranes can be your best bet.

What Material and Condition is the Ground Beneath the Crane?

Cranes need a solid support structure beneath them to support the load and to keep their movement stabilized. While truck mounted cranes are often useful when there is concrete to support the crane itself, outriggers are sometimes not enough on unstable terrain. Rough terrain cranes offer the necessary mobility for grass or dirt surfaces without compromising most of the strength. When there is an uneven substrate, you need to consider the width of the crane’s base.

What Kinds of Obstacles are There?

In many environments, especially urban and suburban ones, cranes need to be adapted to circumventing obstacles. In addition to winds, there may be power lines, other buildings and other obstacles that can keep a crane from being able to simply raise the load directly from its origin point to its destination. In some instances, even the control scheme the crane uses can be difficult in the presence of obstacles, with pendant station cables getting caught. Radio controls may be more effective and less potentially hazardous.

In order to learn more about the selection of the right crane, you need to read the complete guide explaining the way to select the perfect crane for your project.

Comments are closed


Crane Rental Service | Mobile Cranes | Boom Truck Rental | Rough Terrain Crane | Picker Truck Calgary | Crane Equipment | Hydraulic Crane Rental | Folding Boom Crane Services | Stiff Boom Crane Rental | ISNetworld Certified | Tower Crane Erection Services | Crane Rental Lethbridge, Brooks, Medicine Hat | Picker Truck Crane Rental


Copyright ©2016 Stampede Crane & Rigging - Division of TNT Crane & Rigging Canada Inc. All Rights Reserved.